Wiring guides

Will a new chartplotter fit my old dash hole?

A new display almost never drops into the old cutout. How to measure your dash, what the maker's template tells you, and the three ways to make it fit.

The short answer

Almost never. A new display has a different cutout than the one it replaces, even from the same maker and even at the same screen size. Find that out with a tape measure before the box arrives, not after.

What to measure

  1. The hole you have now: width, height and corner shape, with the old unit out or from the old unit's own template.
  2. The flat area around it: how far to the nearest switch, gauge, edge or curve on every side.
  3. The depth behind the dash, and what is back there: steering, cables, a bulkhead.
  4. The dash material and its thickness.

What the new unit needs

Every display has a mounting template in its installation instructions, usually a free download from the maker. It gives the exact cutout, the outside size of the unit and the clearance needed behind it for the plugs. Compare all three with your numbers. The outside size matters as much as the cutout: two units side by side have to clear each other and everything around them.

Three ways to make it fit

Before you cut

Cutting a dash cannot be undone. Print the template at full size, check it against a ruler, tape it in place and look behind the dash before the first cut. If the dash is part of the boat's structure or you are not sure what is behind it, stop and ask a professional.

Want it drawn for your boat?

Tell us about your boat, what you want it to do and the brand you like. We pick the right gear and send back a wiring plan checked by an ABYC and NMEA certified marine electronics installer. Plans start at $149 and arrive in 3 business days.

Start my plan   See a sample plan