Boat survey

Start with three quick questions. The rest is thorough on purpose, because your plan is only as good as what we know about the boat: plan on 15 to 20 minutes. Your answers save on this device as you go, so you can walk out to the boat and come back.

Part 1 Quick start

Three questions. About a minute.

Make and length is plenty for now.

If you don't finish, we send one email with a link back to your saved answers. Nothing else.

Part 2 The boat

Start with what it is and what pushes it.

Radar, antennas and lights mount here, so it changes the cable runs.

Like F150 2019 or Verado 300 2021. It decides how engine data gets onto your screens.

Repowered, custom console, second station added later, that kind of thing.

Part 3 Electronics on board now

List what's there today, even if it's coming out. If you don't know a brand or model, pick Not sure. That's a real answer.

Chartplotters, fishfinders, combo units. Count every one, working or not.

Screen 1

Type what's printed on it. A guess is fine, photos settle it later.

Screen 2

Type what's printed on it. A guess is fine, photos settle it later.

Screen 3

Type what's printed on it. A guess is fine, photos settle it later.

Screen 4

Type what's printed on it. A guess is fine, photos settle it later.

The sonar sensor. Usually on the transom or under the hull.

Transducer 1

Often on a tag near the plug end of its cable.

Transducer 2

Often on a tag near the plug end of its cable.

Transducer 3

Often on a tag near the plug end of its cable.

Type what's printed on it. A guess is fine, photos settle it later.

Type what's printed on it. A guess is fine, photos settle it later.

Type what's printed on it. A guess is fine, photos settle it later.

If the DSC distress button has never been set up, pick Not sure.

Shows other boats on your chart. Sometimes built into the VHF.

Type what's printed on it. A guess is fine, photos settle it later.

Look behind the dash for a row of T-shaped connectors on a thin cable. That's it.

Second radio, satellite compass, weather receiver, instruments, anything. List it even if you don't know what it does.

Part 4 Dash and mounting

Grab a tape measure for this one.

This is where installs go wrong. A new screen almost never drops into the old hole. We need real measurements to tell you whether you need a spacer plate, a new panel, or nothing.

Count holes that have a screen in them and holes that were covered up.

Hole 1

Hole 2

Hole 3

Measure the hole, not the screen's outer edge. If the screen is still in, measure its body from behind the dash, or leave these blank and put a tape measure in your helm photo.

The usable flat area where screens can go.

From the back of the dash face to the first thing in the way.

Either way the plan includes a dimensioned cut drawing.

If it's in the way of a bigger screen, say so.

Part 5 Batteries and power

Every screen and radio depends on what's feeding it.

Assume your boat's wiring has a history. Tell us what you can see, and send photos in Part 7. We flag what we notice, but we can't see everything, and this is not an inspection.

Most boats under 35 ft are 12V.

Type what's printed on it. A guess is fine, photos settle it later.

Not sure is the most common answer. We plan for it.

Look behind the dash and at the batteries. Check anything you see

This is how we work out what shouldn't be there and what to replace. Every boat we see has at least a few.

Brand and age of the batteries, what's been added by previous owners, anything that looks sketchy.

Part 6 Stereo, lighting and accessories

Everything else that draws power or shares a wire run.

Type what's printed on it. A guess is fine, photos settle it later.

Type what's printed on it. A guess is fine, photos settle it later.

Type what's printed on it. A guess is fine, photos settle it later.

Lighting on the boat now
Other gear on board

If it's on the boat and it's electric, list it.

Part 7 What you want

You pick the brand. We pick the right models.

You don't need to know which models to buy. Tell us what you want the boat to do, the brand you like and what you want to spend. The plan picks the right models from that brand and says why.

What you want the boat to do better

What you're trying to fix or add, and how you use the boat. This is the most useful box on the whole survey.

Your call. We choose the models from your brand, and tell you if a job needs something it doesn't make.

Like a certain trolling motor, stereo or radio brand. Leave it blank if you have no preference.

We check anything you list against the boat and the rest of the plan. If it won't work, the plan says so and names what will.

Item 1

The exact model, from the box or your order.

Item 2

The exact model, from the box or your order.

Item 3

The exact model, from the box or your order.

Item 4

The exact model, from the box or your order.

Part 8 Photos

Six shots from your phone.

Photos beat guesses. If you answered Not sure anywhere, a photo is how we find out what you really have.

Step back so the entire dash is in the shot.

Open the access door and shoot the wiring. Messy is fine. This is the photo that finds the problems.

Or its startup screen showing the model.

And the tag on its cable if you can find it.

Photos are optional here. You can send more later from the Contact page.

Part 9 You

Where the plan goes and who's turning the wrenches.

A component is each new device being wired in: a display, transducer, radar, autopilot, radio, sonar module, stereo or trolling motor. Cables, tees and mounts don't count. Fixed prices are for boats up to 35 feet with one helm. Bigger boats and bigger jobs get a price first, and you pay nothing until you accept it.

Sets how much detail goes in your install notes.