Rigging Bench Start a plan

Know every wire and every part before you cut the dash.

Send us your boat and the electronics you want on it. We draw the network and the power wiring, list every part by number, and a certified installer checks it before it goes to you.

Start my plan

$149 for one system, $299 for the whole boat. PDF by email in 3 business days.

TerminatorTerminator Chartplotter12 in, helm VHF / AISconsole Engine gatewayoutboard data drop 2 mdrop 2 mdrop 4 m backbone 6 m 3 A Battery switch power tap Transducer transducer cable, port side chase A B C D Rigging plan: network and power Sample sheet. 25 ft center console, single outboard Your sheet shows your boat, your gear, your cable runs Checked byCertified installer Sheet1 of 3 Sheet 2Parts list Sheet 3Install notes
A sample sheet. The letters match the list below.

What's on your plan

Drawn for your hull, your helm and the gear you picked. Nothing here is a stock template with your name on it.

  • A

    The network, end to end

    Where the backbone runs, where each tee and terminator sits, and how long each piece of cable needs to be.

  • B

    Power

    Where the network and each device get power, fuse or breaker size, wire gauge for the run, and what switches it.

  • C

    What plugs into what

    Every device on the list, the port it uses, and a check that the pieces you chose will talk to each other.

  • D

    Everything that isn't on the network

    Transducer, radar, antenna and audio cable runs, with the adapters people usually find out about halfway through the job.

  • 2

    Parts list

    Sheet 2. Every cable, connector, mount and adapter by manufacturer part number. Buy them anywhere.

  • 3

    Install notes

    Sheet 3. What order to do things in, where to route cable, and what to set up in the menus once it powers on.

How it goes

  1. You describe the boat

    Make, model, what's on it now, what you want to add. Five minutes on the form below.

  2. We draw it and check it

    The plan is drafted, then an installer who holds NMEA and ABYC certifications goes through it line by line.

  3. You get the PDF

    Within 3 business days of payment. Reply with questions about the plan and the installer who checked it answers.

Price

Flat. Paid once.

One system

A chartplotter or fishfinder with its transducer, or one add-on to what you have: radar, autopilot, VHF and AIS, a trolling motor.

$149
Whole boat

A new helm or a full refit. Multiple displays, every networked device, and the battery, charging and power distribution layout behind them.

$299

Start a plan

The more you tell us, the better the drawing. Brand and model numbers help most.

Payment is the next step after this form. Work starts when it's received.

Displays, transducers, VHF, radar, autopilot, stereo, batteries, chargers.

Haven't picked yet? Say what you want it to do and what you want to spend.

Photos of the helm and console help. Reply to your confirmation email with them.

Fair questions

Who checks the plan?

A working marine electronics installer who holds NMEA installer and ABYC certifications. No plan goes out without that review.

Do I have to buy the parts from you?

No. The list uses manufacturer part numbers. Order from whoever you like.

What if I haven't chosen my electronics?

Tell us what you want the boat to do and your budget. The plan will recommend gear and say why.

What if you can't make a plan for my boat?

Then you get your money back, all of it.

Does this replace hiring an installer?

No. The plan is design guidance, and the installation is yours. Follow each manufacturer's instructions and ABYC standards, and bring in a qualified marine technician for any electrical work you aren't sure about.