Wiring guides

How to plan a marine electronics refit

The order to plan a boat electronics refit in, so you buy once: what the boat has, what you want it to do, the gear, the dash, power, and only then the parts.

Start with the boat, not the catalog

Most refits that go over budget started with a screen someone liked. Start with what the boat has and what you want it to do, and the gear list follows from that.

The order that works

  1. Write down what is on the boat now. Every display, transducer, radio, antenna and battery, with model numbers where you can read them. Take photos behind the dash and at the batteries.
  2. Decide what you want the boat to do. Find fish offshore, run at night, see engine data on the screen. Jobs, not model numbers.
  3. Pick a brand and a budget. Staying in one brand for the displays, radar and sonar is what lets them share data without workarounds.
  4. Choose the gear to match. Check every piece against the others before you buy any of it: transducer to display, engine to network, radar to display.
  5. Check the dash. Measure the holes you have against the cutouts the new units need. Decide between enlarging, an adapter plate and a new panel.
  6. Plan the power. A fused circuit for each new device, wire sized for the full run, and a fuse block with room to spare.
  7. Plan the cable runs. Where each cable goes from and to, and whether there is a clear path. Measure before you order lengths.
  8. Only then, order the parts. All of them, including the tees, terminators, adapters and connectors.

What to keep and what to pull

A working thru-hull transducer or a sound antenna can be worth keeping if it matches the new gear. Wiring from equipment that is leaving the boat should leave with it. Abandoned wires that are still live are a common find on older boats and a real fire risk.

Leave room

Add a spare tee on the network and spare circuits in the fuse block. The next thing you add will need both.

Want it drawn for your boat?

Tell us about your boat, what you want it to do and the brand you like. We pick the right gear and send back a wiring plan checked by an ABYC and NMEA certified marine electronics installer. Plans start at $149 and arrive in 3 business days.

Start my plan   See a sample plan