A plain-English guide to an NMEA 2000 network: the backbone, tees, drops, terminators and power, and the mistakes that cause most problems.
What it is
NMEA 2000 is the small network that lets your chartplotter, radio, engine and sensors share data. It carries data and a little power. It does not power a chartplotter or a radio, which still need their own fused power wires.
The four parts
The backbone. One line of cable, or a row of tees joined end to end. On most small boats it sits behind the helm and is under two feet long.
Tees. One for each device and one for power. Each device plugs into the side of its own tee.
Drop cables. The cable from a tee to a device. One device per drop.
Terminators. One at each end of the backbone. Two on the whole network, never one, never three.
Power
The network gets 12 volts at one point, through a power cable plugged into a tee near the middle of the backbone. That cable has an inline fuse. Keep it. Feed it from a switched circuit so the network is off when the boat is off, and do not power it from a second place.
The limits
A small boat will rarely get near these, but they are the rules:
A single drop can be up to 6 m (20 ft).
All the drops added together can be up to 78 m.
The backbone can be up to 100 m with standard small-diameter cable.
Up to 50 devices.
Mixing brands
The standard plug is the same across most brands, so cables and tees from different makers generally fit each other. A few makers use their own plug on their own cable system and sell an adapter cable to the standard one. The data is the same either way.
What goes wrong most often
One terminator, or three. With the network powered off, a healthy backbone measures about 60 ohms between the two data pins. About 120 means a terminator is missing.
Devices chained one into the next where the maker does not allow it. Give each device its own tee.
Power fed in at two points, or taken from a circuit that is always on.
Connectors left where water collects. Mount the backbone high and dry, with each plug hand tight.
Want it drawn for your boat?
Tell us about your boat, what you want it to do and the brand you like. We pick the right gear and send back a wiring plan checked by an ABYC and NMEA certified marine electronics installer. Plans start at $149 and arrive in 3 business days.