Wiring guides

Upgrading to new Garmin displays: what to check first

Replacing older Garmin chartplotters with new ones? Five things to check before you order: the cutout, the transducer plug, the two networks, engine data and power.

New screens are rarely a straight swap

Staying with Garmin keeps a lot working, but a new display is a different size, uses different plugs and may want things the old one did not. Check these five before you order. For anything model-specific, Garmin's installation instructions for the exact unit are the final word.

1. The cutout

A new display almost never fits the old hole, even at the same screen size. Each model has a mounting template in its installation instructions. Compare it with your dash, including the outside size of the unit and the depth behind it.

2. The transducer plug

Garmin has used several transducer plugs over the years, with different pin counts. Adapter cables exist for many combinations, but the plug fitting does not mean every sonar feature works. Look up your transducer and the new display in Garmin's compatibility information.

3. Two networks, two jobs

4. Engine data

If the old display showed engine data, find out how it got there before you pull it out. Whatever connects the engine to the network can normally stay, and the new display picks the data up from the same network.

5. Power

Give each new display its own fused circuit, with the fuse the instructions call for. If the new unit is larger, do not assume the old wire is heavy enough. Check the gauge against the length of the run.

Want it drawn for your boat?

Tell us about your boat, what you want it to do and the brand you like. We pick the right gear and send back a wiring plan checked by an ABYC and NMEA certified marine electronics installer. Plans start at $149 and arrive in 3 business days.

Start my plan   See a sample plan